Sony MDR-1000X Owner's Manual

Wireless Noise Canceling Stereo Headset

MDR-1000X

Pairing and connecting with other BLUETOOTH devices

Pairing is the process required to create a link between BLUETOOTH devices to allow wireless connection.

You must pair a device with the headset to be able to make a BLUETOOTH connection for the first time.

Before you start pairing operation, make sure that:

The BLUETOOTH device is placed within 1 m(3 feet) of the headset.

The headset is charged sufficiently.

The operating instructions of the BLUETOOTH device is on hand.

Enter pairing mode on this headset.

When you pair the headset with a device for the first time after you bought it, or after you initialized the headset (the headset

has no pairing information), press and hold the

button for about 2 seconds when the headset is turned off. The headset

enters pairing mode automatically.

When you pair a 2nd or subsequent device (the headset has pairing information for other devices), press and hold the

button for about 7 seconds.

Make sure that the indicator flashes blue and red alternately after you release the button. You hear voice guidance

“BLUETOOTH pairing”.

Perform the pairing procedure on the BLUETOOTH device to search for this headset.

[MDR-1000X] will be displayed on the list of detected devices on the screen of the BLUETOOTH device. If not displayed,

repeat from step 1.

Select [MDR-1000X].

If passkey (*) input is required on the display of the BLUETOOTH device, input “0000.”