Tascam DR-40 Owner's Manual
TASCAM DR-40
61
When recording starts, the indicator lights and the display
shows the elapsed and remaining recording times.
The following error message appears if the selected file
cannot be played back.
shows the elapsed and remaining recording times.
The following error message appears if the selected file
cannot be played back.
3 To stop recording, press the
(HOME) [8] button.
File names when recording in overdubbing
When overdubbing, file names are generated differently
according to the DUB mode setting.
according to the DUB mode setting.
SEPARATE mode
8
Playback file
File-A:
TASCAM_0004S12.WAV
The newly recorded file (recorded without the playback
signal)
signal)
File-B:
TASCAM_0004S34.WAV
If you record again using the same playback file (File-A),
the name of File-B above is changed to the file name below
(File-C), and the new recording file is given the File-B file
name.
the name of File-B above is changed to the file name below
(File-C), and the new recording file is given the File-B file
name.
File-C:
TASCAM_0004V34t1.WAV
If you record one more time using the same playback file
(File-A) (and File-B and File-C above are saved), the file name
for File-B changes as shown below, with the number at 6
increased by one, and the new recording file given the File-B
file name.
(File-A) (and File-B and File-C above are saved), the file name
for File-B changes as shown below, with the number at 6
increased by one, and the new recording file given the File-B
file name.
File-D:
TASCAM_0004V34t2.WAV
MIX mode
8
Playback file
File-A:
TASCAM_0004S12.WAV
The newly recorded file (recorded with the playback signal
(File-A))
(File-A))
File-E:
TASCAM_0005S12.WAV
4 – Recording