Mackie 802VLZ4 Owner's Manual
802VLZ4
6
802VLZ4
Hookup Diagrams
Live Band PA System
iPod
TM
Docking Station
Microphone
Acoustic
Guitar
Bass
Guitar
Vocal Compressor
(connected to Insert)
Compressor
(connected to Insert)
Send
Return
Send
Return
Keyboards
SRM650 Powered Speakers
Effects Processor
(connected to aux send)
Return
Amplifier
modeler
DI Box
Electric
Guitar
This diagram shows a microphone connected to the mic input of channel 1, and a vocal compressor
connected to the insert jack. A guitar is attached to the instrument input of channel 2, with the instrument
switch pressed in, and a compressor on the insert. A bass guitar is connected to channel 3's mic input via
a DI box, and another guitar plays through an amplifier modeler into channels 5 and 6. Keyboards are
connected to the line inputs of channels 7 and 8.
An effects processor is connected to the aux send, with the aux send set to post-level. Effects are added
to the main mix via the stereo return inputs, and adjusted with the stereo return level control.
To use the aux send for stage monitors instead of an effects processor, set the aux to pre-level so the
monitor volume level can be adjusted independently from the main loudspeakers.
An iPod
TM
docking station is connected to the tape RCA inputs, so you can play pre-recorded music
during the breaks.
The main mix output connects to a pair of SRM650 powered loudspeakers to please your audience.