K&M Smartphone Holder Owner's Manual

INSTALLATION (A-F)

19745 Smartphone Holder

- Universal holder suitable for all devices with a width 46-76 mm
- Particularly suitable for smartphones, flat devices and MP3 players
- Functioning of the operating controls is not affected
- Simply place in the holder and close the clamping jaw
- Released at the press of a button
- Moveable bars can be removed and the holder turned
- Clamps on tube ø 7 - 30 mm
- Flexible holding arm (length 110 mm) for positioning as required

SAFETY NOTES

- Use a suitable stand - the stand must be stable, able to accommodate the weight and

have a tube ø 7-30 mm; e.g. K&M music stands (100/1), for orchestral stands (118/1)

and microphone stands (200), etc.

- Carefully place the smartphone in the holder and ensure it is held firmly in place
- Manoeuvre the holder with care; when adjusting we recommend removing the smartphone

and replacing when adjustment is completed

Thank you for choosing this product. These instructions contain information about the
installation and use of the tablet PC holder. We suggest you keep the instructions in a safe
place for later use.

A PREPARE THE STAND

(see Safety Notes above)

B LAY OUT THE COMPONENTS FOR 19745 IN ORDER

1 Smartphone cradle

2 Holding arm with clamp (for tube ø 7-30 mm)

C CONNECTING THE SMARTPHONE CRADLE TO THE
HOLDING ARM

3 Place the smartphone cradle on the four hooks of the

C 3

holding arm plate...

4 ...and then slide the holding plate in the

C 4

"close" direction against the smartphone cradle until it

C 4

audibly clicks in place.

5 The correct position has been reached when

C 5

"the holding plate sits firmly on the side marked

C 5

"with "close".

D ATTACHING THE HOLDING ARM TO THE TUBE

6 Hold the holding arm clamp on the tube (7-30mm)

D 6

and attach by tightening the knurled screw

7 The knurled screw has a removable protective

D 7

plastic cap to protect the surface of the tube

D 7

(part no. 01-86-865-55)

E PLACING THE SMARTPHONE IN CRADLE

NOTE:

Suitable for devices with a width 46-76 mm

E 1

8 Press the button to part the sides

E 1

9 The two lower bars can be slid to the right or left -

E 19

accommodating a variety of smartphones.

E 19

NOTE:

E 19

The bars can be removed to aid installation. We

E 19

stress the importance of BOTH bars being in

E 19

place when the device is clicked in the cradle.

10 Hold the smartphone with one hand and position

E 10

centrally on the lower bars of the cradle, then

E 10

close the two sides with the other hand until the

E 10

device is held firmly between the moss rubber

E 10

protectors.