Sony DXS-M5511BT Marine Package Owner's Manual

GB

Touch the N-Mark part of the unit with the N-Mark 
part of the smartphone again.

 When making the connection, handle the 

smartphone carefully to prevent scratches.

 One touch connection is not possible when the unit is 

already connected to another NFC compatible device. 
In this case, disconnect the other device, and make 
connection with the smartphone again.

When connecting a BLUETOOTH device for the first 
time, mutual registration (called “pairing”) is 
required. Pairing enables this unit and other devices 
to recognize each other.

Place the BLUETOOTH device within 1 m 
(3 ft) of this unit.

Press CALL, rotate the control dial to 
select [SET PAIRING], then press it.

 flashes while the unit is in pairing standby 

mode.

Perform pairing on the BLUETOOTH 
device so it detects this unit.

Select [DSX-M55BT] shown in the display 
of the BLUETOOTH device.

If your model name does not appear, repeat 
from step 2.

If passkey* input is required on the 
BLUETOOTH device, input [0000].

* Passkey may be called “Passcode,” “PIN code,” 

“PIN number” or “Password,” etc., depending on 
the device.

When pairing is made, 

 stays lit.

Select this unit on the BLUETOOTH device 
to establish the BLUETOOTH connection.

 or 

 lights up when the connection is made.

Note
While connecting to a BLUETOOTH device, this unit 
cannot be detected from another device. To enable 
detection, enter the pairing mode and search for this 
unit from another device.

For details, see “Playing a BLUETOOTH Device” 
(page 15).

Perform step 2 to cancel the pairing mode after this 
unit and the BLUETOOTH device are paired.

To use a paired device, connection with this unit is 
required. Some paired devices will connect 
automatically.

Press CALL, rotate the control dial to 
select [SET BT SIGNL], then press it.

Make sure that 

 lights up.

Activate the BLUETOOTH function on the 
BLUETOOTH device.