Sony MEX-M71BT Owner's Manual
11
GB
Make sure that
lights up on the display
of the unit.
To disconnect by One touch
Touch the N-Mark part of the unit with the
N-Mark part of the smartphone again.
N-Mark part of the smartphone again.
Notes
• When making the connection, handle the
smartphone carefully to prevent scratches.
• One touch connection is not possible when the
unit is already connected to two NFC compatible
devices. In this case, disconnect either device, and
make connection with the smartphone again.
devices. In this case, disconnect either device, and
make connection with the smartphone again.
When connecting a BLUETOOTH device for
the first time, mutual registration (called
“pairing”) is required. Pairing enables this
unit and other devices to recognize each
other. This unit can connect two BLUETOOTH
devices (two cellular phones, or a cellular
phone and an audio device).
the first time, mutual registration (called
“pairing”) is required. Pairing enables this
unit and other devices to recognize each
other. This unit can connect two BLUETOOTH
devices (two cellular phones, or a cellular
phone and an audio device).
1
Place the BLUETOOTH device within
1 m (3 ft) of this unit.
1 m (3 ft) of this unit.
2
Press MENU, rotate the control dial to
select [BLUETOOTH], then press it.
select [BLUETOOTH], then press it.
3
Rotate the control dial to select [SET
PAIRING], then press it.
PAIRING], then press it.
4
Rotate the control dial to select [SET
DEVICE 1]* or [SET DEVICE 2]*, then
press it.
DEVICE 1]* or [SET DEVICE 2]*, then
press it.
flashes while the unit is in pairing
standby mode.
* [SET DEVICE 1] or [SET DEVICE 2] will be
changed to the paired device name after
pairing is complete.
pairing is complete.
5
Perform pairing on the BLUETOOTH
device so it detects this unit.
device so it detects this unit.
6
Select [MEX-XXXX] (your model
name) shown in the display of the
BLUETOOTH device.
name) shown in the display of the
BLUETOOTH device.
If your model name does not appear,
repeat from step 2.
repeat from step 2.
7
If passkey* input is required on the
BLUETOOTH device, input [0000].
BLUETOOTH device, input [0000].
* Passkey may be called “Passcode,” “PIN code,”
“PIN number” or “Password,” etc., depending
on the device.
on the device.
When pairing is made,
stays lit.
8
Select this unit on the BLUETOOTH
device to establish the BLUETOOTH
connection.
device to establish the BLUETOOTH
connection.
or
lights up when the connection is
made.
Note
While connecting to a BLUETOOTH device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for
this unit from another device.
cannot be detected from another device. To enable
detection, enter the pairing mode and search for
this unit from another device.
To start playback
For details, see “Playing a BLUETOOTH
Device” (page 16).
Device” (page 16).
To disconnect the paired device
Perform steps 2 to 4 to disconnect after this
unit and the BLUETOOTH device are paired.
unit and the BLUETOOTH device are paired.
Pairing and connecting with a
BLUETOOTH device
BLUETOOTH device
[0000]
Input passkey