Kenwood KMR-D368BT Owner's Manual

Page of 43
ENGLISH
15
TUNE START*
2
ON: All qualified music channels in the 
SmartFavorite will start playback from the 
beginning of the song. ; OFF: Cancels.
SIGNAL LEVEL
Shows the strength (NO SIGNAL/WEAK/GOOD/
STRONG) of the current received signal.
BUFFER USAGE
Shows the memory usage (0% to 100%) for 
Replay buffer.
SXM RESET
YES: Resets stored channel and lock setting to 
default. ; NO: Cancels.
*
Displayed only when [USER DEFINED] is selected.
*
Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later 
that supports SmartFavorites.
SiriusXM® Radio 
(for 
 / 
 )
BLUETOOTH®
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Connect the microphone
 / 
 : Connect to the microphone input jack. (  34)
Pair and connect a Bluetooth device for the first time
Press 
 to turn on the unit.
Search and select this unit model name (KDC-X3**/KDC-BT2*/KDC-MP3**BT/
KMR-D3**BT) on the Bluetooth device.
 “PAIRING”   “PASS XXXXXX”   Device name   “PRESS”   “VOLUME KNOB” appears 
on the display.
 
•  For some Bluetooth devices, you may need to enter the Personal Identification 
Number (PIN) code immediately after searching.
Press the volume knob to start pairing.
 
“PAIRING OK” appears when pairing is completed. 
Adjust the 
microphone angle
Secure using cord clamps 
(not supplied) if necessary.
MIC (microphone input terminal)*
Microphone 
(supplied)
Rear panel
JS_KWD_KDC_X301_KN_EN_4.indd   15
21/7/2016   11:40:41 AM