K&M 24110 Owner's Manual

- please check the support arms prior to and after use. Please do not use damaged support arms
- do not exceed the max. centric load of 50 kg 
- not suitable for outdoors or moist rooms.
- please refer to local mounting instructions/regulations (may possibly deviate from the examples provided in Sections 5 A,B,C)
- use 4 screws for the wall mount
- only use trained technicians to assemble/mount the system
- only mount on suitable walls with the corresponding assembly material (not included in the delivery)
- walls that are too weak or have electrical and water conduits are not suitable. In case of doubt, consult a qualified technician. 
- check that the screws are tight and the condition of the system regularly.
- careful and attentive handling is required when adjusting the system - due to the possibility of pinching or wedging your hand.
- when using the mount at "events and production sites for scenic presentations" BGV C1 applies accordingly.

a. Pace each cover 6 on the bracket 8 until it clicks into place.
b. Place bracket through the slit in the wall tube 7

b.

ATTENTION: Hold the pieces in such a way that the back of the tube and the cover 

b.

form a line AND the round part of the cover faces forward (see. Illustration 3.b.)

c. Now place the other two covers 6 until they click into place.
d. Screw the support tube 9 with (top open) a U bracket to the wall tube 7: 

d.

- Screw set 1-2-3-3-10-1

d.

ENSURE: when using the top bore hole in the wall tube 7

d.

that the extension arm 4 is in a horizontal position. 

e. Screw the extension arm 4 with (bottom open) a U bracket into the wall tube 7:

e.

- Screw set 1-2-3-3-10-1

f. connect the support tube 9 with the extension arm 4: 

f.

- Screw set 1-2-3-3-10-1

g. The four U discs, large 5 are used a washers for the wall mount

Conduct a visual inspection to
ensure that all the parts are
included and are in working
order.

4 extension arm
7 wall tube 
9 support tube 

in the bag: 
1 12 x caps
2   3 x screws M6 x 60 mm
3   6 x U-discs, small
5   4 x U-discs, large
6   4 x bracket covers
8   2 x bracket
10 3 x securing nuts M6

Thank you for choosing this product. The instructions provide directions to all of the important setup and handling steps. We
recommend you keep these instructions for future reference.