Kicker KM44CW Owner's Manual

Page of 17
2
The KICKER KM coaxial speakers are specifi cally designed for mounting in free-air applications. The 
speakers do not require a sealed enclosure for optimum performance. It is important to isolate the sound 
coming off the front of the driver from the sound radiating from the back of the driver. This isolation is 
usually accomplished by using the driver in a factory speaker location, or in a location with a semi-isolated 
rear chamber.
SPECIFICATIONS
Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
LOCATION
The sound produced by the KM coaxials is directional. Find the best location for stereophonic sound. If 
necessary, add more KM coaxial speakers to the system to help distribute and balance the sound-stage. 
After determining the best mounting locations, carefully check the areas where the mounting hardware will 
be placed.
Model:
KM4
KM65
KM8
Woofer [in, mm]
4, 100
6-1/2, 160
8, 200
Tweeter [in,mm]
1/2, 13 
3/4, 20
1, 25
Rated Impedance [Ω]
2, 4
2, 4
4
Peak Power Handling [ Watts]
150
195
300
Continuous Power Handling [Watts RMS] 
50
65
150
Sensitivity [1W, 1m]
89
90
92
Frequency Response [Hz]
60-20k 
35-21k
30-21k
Mounting Hole Diameter [in, mm]
3-13/16, 97
5-1/8, 130
6-11/16, 170
Mounting Depth [in, mm]
1-7/8, 48
2-7/8, 72
3-1/4, 82
Grilles
Yes
Yes
Yes
Tweeter Magnet Material
Neodymium
Neodymium
Neodymium
Tweeter Dome Material
PEI (polyether imide) Titanium
Titanium
Tweeter Design
Balanced Dome
Dome
Dome
Woofer Cone Material
Polypropylene
Polypropylene
Polypropylene
Woofer Surround Material
Santoprene
Santoprene
Santoprene
KM Coaxial Speakers 
Owner’s Manual
Pro Tip: You are one KXM Amplifi er and a few cables away from a complete, high-quality system with 
rock-solid bottom end as only available from KICKER! Please ask your dealer about KICKER KXM amplifi er 
upgrades.
2014 KM Coax Rev d.indd   2
11/22/2013   11:44:33 AM