Canon PowerShot SX420 IS Owner's Manual

16

 

●

Make sure the memory card is facing the 

right way when you insert it. Inserting 

memory cards facing the wrong way may 

damage the camera.

 

●

Lower the cover (1) and hold it down as 

you slide it, until it clicks into the closed 

position (2).

 

●

For guidelines on how many shots or hours of recording can be 
saved on one memory card, see “Number of Shots per Memory 
Card” (= 143).

 

●

Open the cover and press the battery 

lock in the direction of the arrow.

 

●

The battery pack will pop up.

 

●

Push the memory card in until it clicks, 

and then slowly release it.

 

●

The memory card will pop up.

(1)

(2)

Insert the included battery pack and a memory card (commercially 

available).

Note that before using a memory card that is new or has been 

formatted in another device, you should format the memory card with 

 

●

Slide the cover (1) and open it (2).

 

●

Holding the battery pack with the 

terminals (1) facing as shown, press the 

battery lock (2) in the direction of the 

arrow and insert the battery pack until the 

lock clicks shut.

 

●

If you insert the battery pack facing the 

wrong way, it cannot be locked into the 

correct position. Always confirm that the 

battery pack is facing the right way and 

locks when inserted.

 

●

Recording is not possible on memory 

cards with a write-protect switch when the 

switch is in the locked position. Slide the 

switch to the unlocked position.

 

●

Insert the memory card with the label (1) 

facing as shown until it clicks into place.

(1)

(2)

(1)

(2)

(1)