Canon PowerShot SX420 IS Owner's Manual
40
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
4
P Mode
9
Appendix
Index
Changing the Image Display Style after Shots
Still Images
Movies
You can change how long images are displayed and what information is
displayed immediately after shooting.
Changing the Image Display Period after Shots
1
Access the [Review image after
shooting] screen.
●
Press the [
] button, choose
[Review image after shooting] on the
[ ] tab, and then press the [ ] button
2
Configure the setting.
●
Press the [ ][ ] buttons to choose
[Display Time]. Press the [ ][ ] buttons
to choose the desired option.
●
To restore the original setting, repeat this
process but choose [Quick].
Quick
Displays images only until you can shoot again.
2 sec.,
4 sec.,
8 sec.
Displays images for the specified time. Even while the
shot is displayed, you can take another shot by pressing
the shutter button halfway again.
Hold
Displays images until you press the shutter button
halfway.
Off
No image display after shots.
Deactivating the Red-Eye Reduction Lamp
Still Images
Movies
A lamp lights up to reduce red-eye when the flash is used in low-light
shots. If you prefer, you can deactivate the lamp.
1
Access the [Flash Settings] screen.
●
Press the [
] button, choose [Flash
Settings] on the [ ] tab, and then press
the [ ] button (= 25).
2
Configure the setting.
●
Choose [Red-Eye Lamp], and then
choose [Off] (= 25).
●
To restore the original setting, repeat this
process but choose [On].