Canon PowerShot SX420 IS Owner's Manual

Page of 231
81
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
4
P Mode
9
Appendix
Index
Connecting via NFC When Camera Is in Playback 
Mode
 
Press the [
] button to turn the camera 
on.
 
Touch the N-Mark ( ) on the smartphone 
against the camera’s N-Mark.
 
Press the [ ][ ][ ][ ] buttons to choose 
an image to send, and then press the [ ] 
button. [ ] is displayed.
 
To untag the image, press the [ ] button 
again. [ ] is no longer displayed.
 
Repeat this process to choose additional 
images.
 
After you finish choosing images, press 
the [
] button.
 
Press the [ ][ ] buttons to choose [OK], 
and then press the [ ] button.
 
Press the [ ][ ][ ][ ] buttons to choose 
[Send], and then press the [ ] button.
 
The images are sent.
 
 
The camera does not keep a record of smartphones you connect 
to via NFC in Playback mode.
 
You can preset images to transfer at your desired size (= 97).
 
When using NFC, keep the following points in mind.
 -
Avoid strong impact between the camera and smartphone. This 
may damage the devices.
 -
Depending on the smartphone, the devices may not recognize 
each other immediately. In this case, try holding the devices 
together in slightly different positions. If connection is not 
established, keep the devices together until the camera screen 
is updated.
 -
If you try to connect while the camera is off, a message will be 
displayed on your smartphone to ask you to turn the camera on. 
Touch and try again after the camera is turned on.
 -
Do not place other objects between the camera and 
smartphone. Also, note that camera or smartphone covers or 
similar accessories may block communication.
 
All images in the camera can be viewed from the connected 
smartphone when you choose [Yes] in step 3. To keep camera 
images private, so that they cannot be viewed from the 
smartphone, choose [No] in step 3.
 
Once you have registered a smartphone, you can change privacy 
settings for it on the camera (= 103).
 
Connections require that a memory card be in the camera.
 
You can change the nickname of the camera displayed on the 
screen of step 2 (= 80).
 
Not all NFC-compatible smartphones have an N-Mark ( ). For 
details, refer to the smartphone user manual.
 
You can also send multiple images at once and change the image 
size before sending (= 97).
 
You can send the current image by choosing [Send this image] on 
the screen in step 4.
 
To disable NFC connections, choose MENU (= 25) > [ ] tab 
> [Wireless settings] > [Wi-Fi Settings] > [NFC] > [Off].