Canon PowerShot SX420 IS Owner's Manual

Page of 231
91
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
4
P Mode
9
Appendix
Index
Establish a connection with an 
access point.
 
Connect to the access point as described 
Enter your e-mail address.
 
Once the camera is connected to CANON 
iMAGE GATEWAY via the access point, a 
screen is displayed for entering an e-mail 
address.
 
Enter your e-mail address, press the 
[ ][ ] buttons to choose [Next], and 
then press the [ ] button.
Enter a four-digit number.
 
Enter any four-digit number, press the 
[ ][ ] buttons to choose [Next], and 
then press the [ ] button.
 
You will need this four-digit number later 
when setting up linkage with CANON 
iMAGE GATEWAY in step 8.
Registering CANON iMAGE GATEWAY
To link the camera and CANON iMAGE GATEWAY, add CANON iMAGE 
GATEWAY as a destination Web service on the camera. By setting 
this, an e-mail notification for Camera Web Link Settings will be sent, 
so you must use the e-mail address that you use on your computer or 
smartphone.
Access the Wi-Fi menu.
 
Press the [ ] button.
 
After the [Device Nickname] screen is 
displayed, press the [ ][ ] buttons to 
choose [OK], and then press the [ ] 
button.
Choose [
].
 
Press the [ ][ ][ ][ ] buttons to choose 
[
], and then press the [ ] button.
Consent to entering your e-mail 
address.
 
Read the displayed content, press the 
[ ][ ] buttons to choose [I Agree], and 
then press the [ ] button.