Canon PowerShot SX420 IS Owner's Manual

95

Connect two cameras via Wi-Fi and send images between them as follows.

 

●

Only Canon-brand cameras equipped with a Wi-Fi function can 

be connected to wirelessly. You cannot connect to a Canon-brand 

camera that does not have a Wi-Fi function, even if it supports 

FlashAir/Eye-Fi cards.

 

●

Access the Wi-Fi menu as described 

 

●

Press the [ ][ ][ ][ ] buttons to choose 

[ ], and then press the [ ] button.

 

●

Press the [ ][ ] buttons to choose [Add 

a Device], and then press the [ ] button.

 

●

Follow steps 1 – 3 on the target camera 

too.

 

●

Camera connection information will be 

added when [Start connection on target 

camera] is displayed on both camera 

screens.

 

●

Connections require that a memory card with saved images be in 
the camera.

 

●

Once you have connected to devices via the Wi-Fi menu, recent 
destinations will be listed first when you access the Wi-Fi menu. 
You can easily connect again by pressing the [ ][ ] buttons to 
choose the device and then pressing the [ ] button. To add a 
new device, display the device selection screen by pressing the 
[ ][ ] buttons, and then configure the setting.

 

●

If you prefer not to display recent target devices, choose MENU 
(= 25) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] > 
[Target History] > [Off].

 

●

To be able to connect without entering the password in step 4 
and to make it so that [Password] does not display on the SSID 
display screen (step 3), choose MENU (= 25) > [ ] tab > 
[Wireless settings] > [Wi-Fi Settings] > [Password] > [Off].

 

●

To use another access point, follow steps 3 – 4 in “Using Another 
Access Point” (= 84).