Canon PowerShot SX420 IS Owner's Manual

Page of 231
96
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
4
P Mode
9
Appendix
Index
 
Connections require that a memory card be in the camera.
 
Once you have connected to devices via the Wi-Fi menu, recent 
destinations will be listed first when you access the Wi-Fi menu. 
You can easily connect again by pressing the [ ][ ] buttons to 
choose the device and then pressing the [ ] button. To add a 
new device, display the device selection screen by pressing the 
[ ][ ] buttons, and then configure the setting.
 
If you prefer not to display recent target devices, choose MENU 
(= 25) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] > 
[Target History] > [Off].
 
You can also send multiple images at once and change the image 
size before sending (= 97).
 
You can send the current image by choosing [Send this image] on 
the screen in step 4.
Send images.
 
Press the [ ][ ][ ][ ] buttons to choose 
[Select and send], and then press the [ ] 
button.
 
Press the [ ][ ] buttons to choose 
[Select], and then press the [ ] button.
 
Press the [ ][ ][ ][ ] buttons to choose 
an image to send, press the [ ] button to 
mark it as selected ([ ]), and then press 
the [
] button.
 
Press the [ ][ ] buttons to choose [OK], 
and then press the [ ] button.
 
Press the [ ][ ][ ][ ] buttons to choose 
[Send], and then press the [ ] button.
 
[Transfer completed] is displayed after 
the image is sent, and the image transfer 
screen is displayed again.
 
To end the connection, press the 
[
] button, press the [ ][ ] buttons 
on the confirmation screen to choose 
[OK], and then press the [ ] button.