Nikon Coolpix W300 Owner's Manual

Page of 310
97
Recording the Location Data on the Image
Set Time zone and date (
A162) correctly before using the location data functions.
1
Set Use built-in location data to On.
• After the settings are complete, press the d 
button or shutter-release button to exit the menu.
• To receive signals easily, operate in an open-air 
area.
2
Check the location data reception on 
the shooting screen.
• n or o: Signals are being received from four or 
more satellites, or from three satellites, and 
location data is being obtained. The location data 
is recorded on the image.
• z: Signals are being received, but location data 
cannot be obtained. The location data is not 
recorded on the image.
• y: Signals cannot be received from the satellites, 
and location data cannot be obtained. The location data is not recorded on the 
image.
3
Shoot images while positioning is being performed.
• The location data is recorded on shot images.
• z is displayed on images with recorded location data in the camera’s playback 
screen (
A7).
• The recorded location data can be checked on a map by using ViewNX-i after 
transferring images to a computer (
Recording the Location Data on the Image
Press the 
d button M z menu icon M Location data options M k button
Use built-in location data
On
Off
40
10
0
-10
30
20
25m 0s
25m 0s
500
500
15m
15m
1010hPa
1010hPa
Location data reception
downloadlike
ArtboardArtboardArtboard