Nikon Coolpix W300 Owner's Manual

Page of 310
-3-
2
Press the 
k button when the dialog on 
the right is displayed on the camera.
3
Launch SnapBridge on the smart device 
when the dialog on the right is 
displayed on the camera.
• Place the smart device close to the camera.
• If you are pairing after unpairing (page 7), launch 
SnapBridge and then tap w in the y Connect 
tab.
4
When the name of the camera you 
want to pair with is displayed in the 
smart device, tap it.
• For iOS:
If you are pairing for the first time, a dialog 
explaining the procedure is displayed. Confirm the 
details and tap Understood (If Understood is not 
displayed, scroll down the screen.).
Tap the camera name again when the accessory 
selection screen is displayed (it may take some time for the camera name to be 
displayed.).
• If the camera name is not displayed even after waiting for a while, close SnapBridge 
completely and perform pairing again from step 3.
5
Confirm that the camera and smart 
device display the same authentication 
code (six digits).
• The authentication code may not be displayed in 
some versions of iOS. Proceed to step 6 even in 
such cases.
Use SnapBridge to send photos to your
smar t device and share them online.
To skip this screen and set SnapBridge
later from the Network menu, press
MENU.
Later
Set
App
SnapBridge
Camera
On your smar t device, go to the app
store and search for SnapBridge. After
installing, open the SnapBridge app.
Cancel
Connect to Camera
Camera name
Auth. code
000000
Confirm that the same authentication
code is displayed on the smar t device
and press OK.
Cancel
OK
downloadlike
ArtboardArtboardArtboard
Report Bug