Canon PowerShot SX730 HS Owner's Manual
135
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Sending Images
Images sent from the camera are automatically saved to the computer.
If the computer that you intend to send images to is turned off, the images
will be stored temporarily on the CANON iMAGE GATEWAY server.
Stored images are regularly erased, so make sure to turn on the computer
and save the images.
1
Send images.
●
[ ].
●
Sent images are labeled with a [ ] icon.
2
Save the images to the computer.
●
Images are automatically saved to the
computer when you turn it on.
●
Images are automatically sent to Web
services from the CANON iMAGE
GATEWAY server, even if the computer
is off.
●
When sending images, you should use a fully charged battery
pack.
pack.
●
Even if images were imported to the computer through a different
method, any images not sent to the computer via CANON iMAGE
GATEWAY will be sent to the computer.
method, any images not sent to the computer via CANON iMAGE
GATEWAY will be sent to the computer.
●
Sending is faster when the destination is a computer on the same
network as the camera, because images are sent via the access
point instead of CANON iMAGE GATEWAY. Note that images
stored on the computer are sent to CANON iMAGE GATEWAY, so
the computer must be connected to the Internet.
network as the camera, because images are sent via the access
point instead of CANON iMAGE GATEWAY. Note that images
stored on the computer are sent to CANON iMAGE GATEWAY, so
the computer must be connected to the Internet.
2
Choose the type of images to send
(only when sending movies with
images).
●
Press the [
] button, choose
[Wireless settings] on the [ ] tab, and
then choose [Wi-Fi Settings] (= 29).
●
Press the [ ][ ] buttons to choose
[Image Sync], and then press the [ ][ ]
buttons to choose [Stills/Movies].
Preparing the Computer
Install and configure the software on the destination computer.
1
Install Image Transfer Utility.
●
Install Image Transfer Utility on a
computer connected to the Internet
“Installing CameraWindow” (= 120).
●
Image Transfer Utility can also be
downloaded from the Image Sync
settings page of CANON iMAGE
GATEWAY (= 126).
2
Register the camera.
●
Windows: In the taskbar, right-click [ ],
and then click [Add new camera].
●
Mac OS: In the menu bar, click [ ], and
then click [Add new camera].
●
A list of cameras linked to CANON
iMAGE GATEWAY is displayed. Choose
the camera from which images are to be
sent.
●
Once the camera is registered and the
computer is ready to receive images, the
icon changes to [ ].