Canon PowerShot SX730 HS Owner's Manual

154

 

●

For details on charging time and the number of shots and 
recording time possible with a fully charged battery pack, see 
“Power” (= 183).

 

●

You can view images even while the battery is charging, by 
turning the camera on and entering Playback mode (= 23). 
However, you cannot shoot while the battery is charging.

 

●

If the USB charge lamp is not lit, reconnect the interface cable.

 

●

Charged battery packs gradually lose their charge, even when 
they are not used. Charge the battery pack on (or immediately 
before) the day of use.

 

●

The charger can be used in areas with 100 – 240 V AC power 
(50/60 Hz). For power outlets in a different format, use a 
commercially available adapter for the plug. Never use an 
electrical transformer designed for traveling, which may damage 
the battery pack.

 

●

CA-DC30: Flip out the plug (1) and plug 

the compact power adapter into a power 

outlet (2).

 

●

CA-DC30E: Plug the power cord into the 

compact power adapter, then plug the 

other end into a power outlet.

 

●

Charging begins and the USB charge 

lamp lights up.

 

●

The lamp turns off when charging 

finishes.

 

●

Remove the compact power adapter from 

the power outlet and the interface cable 

from the camera.

 

●

To protect the battery pack and keep it in optimal condition, do not 
charge it continuously for more than 24 hours.

 

●

When charging another battery pack, always disconnect the 
interface cable from the camera before replacing the battery pack 
for charging.