Canon PowerShot SX730 HS Owner's Manual

165

No AF frames are displayed and the camera does not focus when the 

shutter button is pressed halfway.

 

●

To have AF frames displayed and the camera focus correctly, try composing the 

shot with higher-contrast subject areas centered before you press the shutter 

button halfway. Otherwise, try pressing the shutter button halfway repeatedly.

Subjects in shots look too dark.

 

●

Raise the flash and set the flash mode to [ ] (= 81).

 

●

Adjust brightness by using exposure compensation (= 71).

 

●

Adjust contrast by using i-Contrast (= 72, = 104).

 

●

Use AE lock or spot metering (= 71, = 71).

Subjects look too bright, highlights are washed-out.

 

●

Lower the flash and set the flash mode to [ ] (= 33).

 

●

Adjust brightness by using exposure compensation (= 71).

 

●

Use AE lock or spot metering (= 71, = 71).

 

●

Reduce the lighting on subjects.

Shots look too dark despite the flash firing (= 36).

 

●

Shoot within flash range (= 181).

 

●

Adjust brightness by using flash exposure compensation or changing the flash 

output level (= 82, = 86).

 

●

Subjects in flash shots look too bright, highlights are washed-out.

 

●

Shoot within flash range (= 181).

 

●

Lower the flash and set the flash mode to [ ] (= 33).

 

●

Adjust brightness by using flash exposure compensation or changing the flash 

output level (= 82, = 86).

White spots appear in flash shots.

 

●

This is caused by light from the flash reflecting off dust or airborne particles.

Shots look grainy.

 

●

Lower the ISO speed (= 72).

 

●

Subjects are affected by red-eye.

 

●

Set [Red-Eye Lamp] to [On] (= 54). The red-eye reduction lamp (= 4) 

will light up for flash shots. For best results, have subjects look at the red-eye 

reduction lamp. Also try increasing the lighting in indoor scenes and shooting at 

closer range.

 

●

Edit images using red-eye correction (= 104).

Cannot shoot.

 

●

In Playback mode (= 87), press the shutter button halfway (= 26).

Strange display on the screen under low light (= 27).
Strange display on the screen when shooting.

 

●

Note that the following display problems are not recorded in still images but are 

recorded in movies.

 -

The screen may flicker and horizontal banding may appear under fluorescent 

or LED lighting.

Full-screen display is not available while shooting (= 50).
No date stamp is added to images.

 

●

Configure the [Date Stamp  ] setting (= 42). Note that date stamps are not 

added to images automatically, merely because you have configured the [Date/

Time] setting (= 19).

 

●

Date stamps are not added in shooting modes (= 178) in which [Date Stamp  ] 

[ ] flashes on the screen when the shutter button is pressed, and shooting 

is not possible (= 36).
[ ] is displayed when the shutter button is pressed halfway (= 36).

 

●

Set [IS Mode] to [Continuous] (= 83).

 

●

Raise the flash and set the flash mode to [ ] (= 81).

 

●

Increase the ISO speed (= 72).

 

●

Mount the camera on a tripod or take other measures to keep it still. Additionally, 

you should set [IS Mode] to [Off] when using a tripod or other means to secure 

the camera (= 83).

Shots are out of focus.

 

●

Press the shutter button halfway to focus on subjects before pressing it all the 

way down to shoot (= 26).

 

●

 

●

 

●

Confirm that unneeded functions such as macro are deactivated.

 

●

Try shooting with focus lock or AF lock (= 77, = 80).