Canon PowerShot SX730 HS Owner's Manual
21
Before Use
Basic Guide
Advanced Guide
Camera Basics
Index
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Trying the Camera Out
Still Images
Movies
Try out the camera by turning it on, shooting some still images or movies,
and viewing them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1
Turn the camera on.
●
Press the power button.
●
The startup screen is displayed.
2
Enter [
] mode.
●
Set the mode dial to [
].
●
Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
●
Icons representing the scene and image
stabilization mode are displayed in the
upper left of the screen.
●
Frames displayed around any detected
subjects indicate that they are in focus.
3
Compose the shot.
●
To zoom in and enlarge the subject, move
the zoom lever toward [
] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle).
Display Language
Change the display language as needed.
1
Enter Playback mode.
●
Press the [
] button.
2
Access the setting screen.
●
Press and hold the [ ] button, and then
immediately press the [
] button.
3
Set the display language.
●
Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose a language, and
then press the [ ] button.
●
Once the display language has been set,
the setting screen is no longer displayed.
●
The current time is displayed if you wait too long in step 2 after
pressing the [ ] button before you press the [
pressing the [ ] button before you press the [
] button.
In this case, press the [ ] button to dismiss the time display and
repeat step 2.
repeat step 2.
●
You can also change the display language by pressing the
[
[
] button and choosing [Language ] on the [ ] tab.