Canon PowerShot SX730 HS Owner's Manual

22

 

●

Press the movie button. The camera 

beeps once as recording begins, and  

[ Rec] is displayed with the elapsed 

time (1).

 

●

Black bars are displayed on the top and 

bottom edges of the screen, and the 

subject is slightly enlarged. The black 

bars indicate image areas not recorded.

 

●

Frames displayed around any detected 

faces indicate that they are in focus.

 

●

Once recording begins, take your finger 

off the movie button.

 

●

Press the movie button again to stop 

recording. The camera beeps twice as 

recording stops.

(1)

 

●

Press the shutter button lightly, halfway 

down. The camera beeps twice after 

focusing, and frames are displayed to 

indicate image areas in focus.

 

●

If [Raise the flash] is displayed, move 

the [ ] switch to raise the flash. It will fire 

when shooting. If you prefer not to use 

the flash, push it down with your finger, 

into the camera.

 

●

Press the shutter button all the way 

down.

 

●

As the camera shoots, a shutter sound 

is played, and in low-light conditions 

when you have raised the flash, it fires 

automatically.

 

●

Keep the camera still until the shutter 

sound ends.

 

●

After displaying your shot, the camera will 

revert to the shooting screen.