Canon PowerShot SX730 HS Owner's Manual

34

 

●

Press the shutter button all the way down.

 

●

As the camera shoots, a shutter sound 

is played, and in low-light conditions 

when you have raised the flash, it fires 

automatically.

 

●

Keep the camera still until the shutter 

sound ends.

 

●

After displaying your shot, the camera will 

revert to the shooting screen.

 

●

Press the movie button. The camera 

beeps once as recording begins, and  

[ Rec] is displayed with the elapsed 

time (1).

 

●

Black bars are displayed on the top and 

bottom edges of the screen, and the 

subject is slightly enlarged. The black 

bars indicate image areas not recorded.

 

●

Frames displayed around any detected 

faces indicate that they are in focus.

 

●

Once recording begins, take your finger 

off the movie button.

 

●

To resize the subject, repeat the 

operations in step 3.  

However, note that the sound of camera 

operations will be recorded. Note that 

movies shot at zoom factors shown in 

blue will look grainy.

 

●

When you recompose shots, the 

focus, brightness, and colors will be 

automatically adjusted.

(1)

 

●

To zoom in and enlarge the subject, move 

the zoom lever toward [

] (telephoto), 

and to zoom away from the subject, move 

it toward [ ] (wide angle). (A zoom 

bar (1) showing the zoom position is 

displayed, along with the range of focus 

(2).)

 

●

To zoom in or out quickly, move the zoom 

lever all the way toward [

] (telephoto) 

or [ ] (wide angle), and to zoom in 

or out slowly, move it just a little in the 

desired direction.

 

●

Press the shutter button halfway. The 

camera beeps twice after focusing, and 

frames are displayed to indicate image 

areas in focus.

 

●

Several frames are displayed when 

multiple areas are in focus.

 

●

If [Raise the flash] is displayed, move 

the [ ] switch to raise the flash. It will fire 

when shooting. If you prefer not to use 

the flash, push it down with your finger, 

into the camera.

(1)

(2)