Canon PowerShot SX730 HS Owner's Manual

44

 

●

For movies recorded using the self-timer, recording begins after 
your specified delay time, but specifying the number of shots has 
no effect.

 

●

When you specify multiple shots, image brightness and color tone 
are determined by the first shot. More time is required between 
shots when the flash fires or when you have specified to take 
many shots. Shooting will stop automatically when the memory 
card becomes full.

 

●

When a delay longer than two seconds is specified, two seconds 
before the shot, the lamp blinking and self-timer sound will speed 
up. (The lamp will remain lit in case the flash fires.)

In [

] mode, hold the shutter button all the way down to shoot 

continuously.

 

●

Press the [ ] button, choose [ ] in the 

menu, and then choose [ ] (= 28).

 

●

Once the setting is complete, [ ] is 

displayed.

 

●

Hold the shutter button all the way down 

to shoot continuously.

This option delays shutter release until about two seconds after you 

have pressed the shutter button. If the camera is unsteady while you are 

pressing the shutter button, it will not affect your shot.

 

●

Follow step 1 in “Using the Self-Timer” 

(= 43) and choose [ ].

 

●

Once the setting is complete, [ ] is 

displayed.

 

●

Follow step 2 in “Using the Self-Timer” 

You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).

 

●

Following step 1 in “Using the Self-Timer” 

(= 43), choose [ ] and press the 

[

] button.

 

●

Press the [ ][ ] buttons to choose the 

delay time or number of shots.

 

●

Press the [ ][ ] buttons or turn the [ ] 

dial to choose a value, and then press the 

[ ] button.

 

●

Once the setting is complete, [ ] is 

displayed.

 

●

Follow step 2 in “Using the Self-Timer”