Fujifilm X-E3 Prime Lens Kit Owner's Manual
109
5
T
a
k
ing Phot
og
raphs
raphs
Flash Photography
Flash Settings
The following settings are
available when the sup-
plied EF-X8 shoe-mount-
ed fl ash unit is attached.
available when the sup-
plied EF-X8 shoe-mount-
ed fl ash unit is attached.
ADJUST
END
MODE
SUPPLIED FLASH
Setting
Setting
Description
Description
A
Flash control
mode
mode
Choose from the following options:
•
TTL: TTL mode. Adjust fl ash compensation (
B
)
and choose a fl ash mode (
C
).
•
M: The fl ash fi res at the selected output (
B
) re-
gardless of subject brightness or camera settings.
Output is expressed in fractions of full power,
from ⁄ to ⁄. The desired results may not be
achieved at low values if they exceed the limits
of the fl ash control system; take a test shot and
check the results.
Output is expressed in fractions of full power,
from ⁄ to ⁄. The desired results may not be
achieved at low values if they exceed the limits
of the fl ash control system; take a test shot and
check the results.
•
C (COMMANDER): Choose if the fl ash is being
used to control remote synced fl ash units, for ex-
ample as part of a studio fl ash system.
used to control remote synced fl ash units, for ex-
ample as part of a studio fl ash system.
•
D (OFF): The EF-X8 does not fi re. Flash units
connected via the sync terminal will still fi re
when the shutter is released, but can be disabled
by lowering the EF-X8 and turning the units off in
the fl ash settings menu.
connected via the sync terminal will still fi re
when the shutter is released, but can be disabled
by lowering the EF-X8 and turning the units off in
the fl ash settings menu.