Olympus OM-D E-M1 Mark II (no lens included) Owner's Manual

EN

•  Charge the battery with the charger.

•  Battery performance drops at low temperatures. Remove the battery and warm it by 

putting it in your pocket for a while.

•  If power saving is enabled, the camera will enter sleep mode if no operations are 

performed for a set period. Press the shutter button halfway to exit the sleep mode.

•  The camera automatically enters sleep mode to reduce the drain on the battery if no 

operations are performed for a set period of time. g [Sleep] (P. 122)
If no operations are performed for a set time after the camera has entered sleep mode, 
the camera will turn off automatically. g [Auto Power Off] (P. 122)

•  On the monitor, the # mark blinks when charging is in progress. Wait for the blinking to 

stop, then press the shutter button.

•  The camera cannot focus on subjects that are too close to the camera or that are not 

suited to autofocus (the AF con rmation mark will blink in the monitor). Increase the 
distance to the subject or focus on a high contrast object at the same distance from the 
camera as your main subject, compose the shot, and shoot.

It may be dif cult to focus with auto focus in the following situations.

Subject with low 
contrast

Excessively bright 
light in center of frame

Subject containing 
no vertical lines

AF con rmation 
mark is blinking.
These subjects 
are not focused.

Subjects at different 
distances

Fast-moving subject

Subject not inside 
AF area

AF con rmation 
mark lights up but 
the subject is not 
focused.