Canon PowerShot G7 X Mark II Owner's Manual

19

 

z

Holding the battery pack with the 

terminals in the position shown (1), hold 

the battery lock toward (2) and insert 

the battery pack toward (3) until the lock 

clicks shut.

 

z

If you insert the battery pack facing the 

wrong way, it cannot be locked into the 

correct position. Always confirm that the 

battery pack is facing the right way and 

locks when inserted.

 

z

Recording is not possible on memory 

cards with a write-protect switch when the 

switch is in the locked position. Move the 

switch toward (1).

 

z

Insert the memory card with the label (2) 

facing as shown until it clicks into place.

 

z

Make sure the memory card is facing the 

right way when you insert it. Inserting 

memory cards facing the wrong way may 

damage the camera.

 

z

Lower the cover (1) and hold it down as 

you slide the switch, until it clicks into the 

closed position (2).

(3)

(1)

(2)

(2)

(1)

(1)

(2)

 

●

For details on charging time and the number of shots and 
recording time possible with a fully charged battery pack, see 
“Number of Shots/Recording Time, Playback Time” (= 219).

 

●

Charged battery packs gradually lose their charge, even when 
they are not used. Charge the battery pack on (or immediately 
before) the day of use.

 

●

As a visual reminder of the charge status, attach the battery cover 
with   visible on a charged battery pack and concealed on an 
uncharged one.

 

●

The charger can be used in areas with 100 – 240 V AC power 
(50/60 Hz). For power outlets in a different format, use a 
commercially available adapter for the plug. Never use an 
electrical transformer designed for traveling, which may damage 
the battery pack.

Insert the included battery pack and a memory card (sold separately).

Note that before using a memory card that is new or has been formatted 

in another device, you should format the memory card with this camera 

(= 169).

 

z

Slide the switch (1) and open the cover 

(2).

(2)

(1)