Canon PowerShot G7 X Mark II Owner's Manual

90

When you want to change the position or size of the AF frame, set the AF 

method to [1-point AF].

 

z

Touch the screen. An AF frame is 

displayed in orange where you touched 

(Touch AF).

 

z

Turn the [ ] dial to move the AF frame, 

and press the [ ][ ][ ][ ] buttons to 

fine-tune the position.

 

z

To return the AF frame to the original 

position in the center, press the [

] 

button.

 

z

To reduce the AF frame size, turn the 

[ ] ring. Turn it again to restore it to the 

original size.

 

z

Press the [ ] button.

 

●

AF frames are displayed at normal size when you use the digital 
zoom (= 41) or digital tele-converter (= 89), and in manual 
focus mode (= 87).

 

●

You can also link the Spot AE Point frame to the AF frame 
(= 79).

 

●

You can also configure the AF frame size by pressing the 
[

] button and choosing [AF Frame Size] on the [

3] tab 

The camera focuses using a single AF frame. Effective for reliable 

focusing. You can also move the frame by touching the screen (= 93).

 

●

A yellow AF frame is displayed with [ ] if the camera cannot 
focus when you press the shutter button halfway.

 

●

To compose shots so that subjects are positioned at the edge or 
in a corner, first aim the camera to capture the subject in an AF 
frame, and then hold the shutter button halfway down. As you 
continue to hold the shutter button halfway, recompose the shot 
as desired, and then press the shutter button all the way down 
(Focus Lock).