Sony Cyber-shot® DSC-RX10 Owner's Manual

Required equipment/environment: A smartphone or a tablet computer (A wireless access point is not necessary)

You can monitor the image to be captured and shoot with your smartphone. After step 1 on the reverse side, set the camera to shooting mode and connect
following the steps below.

Using a smartphone/tablet computer as a remote controller (One-touch remote (NFC))

1 Install the latest software on your computer.

Set the Wi-Fi import settings after the software is installed on your computer.

Windows: PlayMemories Home

Mac: Wireless Auto Import

www.sony.net/pm/

http://www.sony.co.jp/imsoft/Mac/
Select [Wireless Auto Import].

2 Connect the camera to an access point.

Note: For more information, refer to the instruction of the access point, or contact the person who set up the access point.

If the wireless access point has a WPS button.

If you know the SSID and password of your wireless access point.

 Select MENU  (Wireless)  [WPS Push] on the camera.

 Select MENU  (Wireless)  [Access Point Set.] on the camera.

 Push the WPS button on the wireless access point you want to register.

 Select the access point you want to register, enter the password, then select [OK].

3 When your computer is not started, turn on the computer.

4 Start sending images to the computer.

 Confirm that a memory card is inserted in the camera.

 Select MENU  (Wireless)  [Send to Computer].



Image saving automatically starts.



Previously sent images are not duplicated.



Sending a movie or multiple still images takes time.

One-touch connection using an NFC-enabled Android Smartphone

Touch

(N mark) on the camera to

(N mark) on the Smartphone.

For notes on connection, see

 under step 2 “Android supporting NFC (One-touch sharing)” on the reverse side.

Connecting without NFC

 (Wireless)  [Ctrl w/ Smartphone]  Proceed to step 2 “Android/iPhone/iPad not supporting NFC”- on the

reverse side.

Communication distance may vary, depending on your surroundings/smartphone.

Sending images to the computer

Steps 1 and 2 are required the first time only.

Using other Wi-Fi functions

Other Wi-Fi functions are available, such as transferring
images to a TV and playing them back.

For further details, refer to the Wi-Fi Guide.

For details on operations, refer to the Wi-Fi Guide.

http://support.d-imaging.sony.co.jp/wi-fi/dsc/2013-3/

Required equipment/environment: The computer must be connected to a wireless access point