Yamaha R-N803 Owner's Manual

Press SPEAKERS A and/or SPEAKERS B to 
select speakers A and/or speakers B.
When speaker set A is turned on, “SPEAKERS 
A:On” appears on the front display.
When speaker set B is turned on, “SPEAKERS 
B:On” appears on the front display.

• When one set of speakers is connected using bi-wire connections, 

or when using two sets of speakers simultaneously (A and B), 

press SPEAKERS A and SPEAKERS B on the front panel or on 

the remote control so that both “A” and “B” indicators light up 

on the front display.

• When listening with headphones, turn off the speakers.

You can adjust the tonal quality by using the BASS, TREBLE, 
BALANCE and LOUDNESS controls or the PURE DIRECT 
switch on the front panel.

When you finish using, press A (power) on 
the front panel to turn off the power.
When you press A (power) on the remote control, this 
unit set to standby mode.

When you select a network source or USB as the input 
source, you can switch playback information on the front 
display.

Press DISPLAY.
Each time you press the key, the displayed item 
changes.

About 3 seconds later, the corresponding information 
for the displayed item appears.

“_” (underscore) will be displayed for characters not supported 
by the unit.

A (power)

Track (song title), Artist (artist name), 
Album (album name)

Track (song title), Artist (artist name), 
Album (album name), Time

Track (song title), Album (album name), 
Time, Station (station name)

Track

INFO

Track #1

SERVER