Yamaha R-N803 Owner's Manual

Press OPTION on the remote control.
The “Option” menu is displayed (p. 46).

Use the cursor keys (B / C) to select “Auto 
Preset”, and then press ENTER.

This unit starts scanning the FM band about 5 
seconds later from the lowest frequency upwards.
To begin scanning immediately, hold down ENTER.

• Before scanning begins, you can specify the first preset number 

to be used by pressing PRESET j / i or cursor key (B/C) on the 
remote control.

• To cancel scanning, press BAND or RETURN.

When scanning is complete, “FINISH” is displayed and 
then the display returns to original state.

■

Follow “FM/AM tuning” (p.25) to tune into the 
desired radio station.

By holding down MEMORY for more than 3 seconds, you can 
skip the following steps and automatically register the selected 
station to an empty preset number (i.e., the preset number 
following the last preset number used).

PRESET j / i to select the preset number to 
which the station will be registered.
If you select a preset number to which no station is 
registered, the message “Empty” is displayed.

Press MEMORY.
When registration is complete, the display returns to 
the original state.

To cancel registration, press RETURN.

j / i

Cursor keys B / C

Auto Preset

OPTION

01:FM 87.5 MHz

READY

j / i

02:Empty

 9850