Yamaha R-N803 Owner's Manual

Page of 89
60 
En
Troubleshooting
This unit cannot be 
detected when using 
AirPlay on an 
iPhone.
A wireless LAN router (access point) 
that supports multiple SSIDs is used.
The network separator function on the wireless LAN 
router (access point) may be preventing this unit 
from being accessed. When connecting to this unit 
with an iPhone, use an SSID on which this unit can 
be accessed (try connecting via the primary SSID).
The unit is not 
detected when using 
a dedicated 
application on a 
mobile device.
This unit and the mobile device are not 
connected to the same network.
Check the network and router settings, to make sure 
that they are connected to the same network.
A wireless LAN router (access point) 
that supports multiple SSIDs is used.
The network separator function on the wireless LAN 
router (access point) may be preventing this unit 
from being accessed. When connecting to this unit 
with a mobile device, use an SSID on which this unit 
can be accessed (try connecting via the primary 
SSID).
Firmware update via 
the network is failed.
The network connection is no good.
Try connecting again after a while, or a USB storage 
device to update the firmware.
The unit cannot 
connect to the 
wireless LAN router 
(access point).
MAC address filtering is enabled on the 
wireless LAN router (access point).
This unit cannot connect to the wireless LAN router 
(access point) if its MAC address filtering is 
enabled. Change the settings on the wireless LAN 
router (access point) to allow this unit to connect.
Problem
Possible cause
Remedy
See 
page