Marantz PM-14S1 Owner's Manual
17
Preparation
Connections
Settings
Tips
Appendix
ENGLISH
Playback
Adjusting the left and right channel
balance
balance
The volume level of the left and right channels can be trimmed
in 0.5 dB steps across a 0.0 – 9.0 dB range.
The factory default setting is 0.0 dB (maximum).
in 0.5 dB steps across a 0.0 – 9.0 dB range.
The factory default setting is 0.0 dB (maximum).
1
Press MENU.
The unit enters the level adjustment mode.
šThe left channel level value flashes.
2
Use
df
to adjust the left channel level.
3
Press
1
.
The adjustment mode selects the right channel.
šThe light channel level value flashes.
4
Use
df
to adjust the right channel level.
5
Press MENU.
The unit exits the adjustment mode.
šIf you have connected a “SLAVE” device using the F.C.B.S.
connection (
vpage 10), proceed to the slave setting.
Adjusting the tone
1
Press TONE.
The TONE indicator lights, and the mode switches to
the tone adjustment mode.
the tone adjustment mode.
2
Turn BASS and TREBLE to adjust the tone.
Press TONE again to switch the tone adjustment mode off.
The TONE indicator turns off.
The TONE indicator turns off.
Turning off the sound temporarily
Press ATT.
“ATT” appears on the display and the sound is muted.
šTo restore the sound, press the button again.
To restore the sound, press the button again.
Setting the attenuation level when sound is
muted
muted
The attenuation level can be set at –20 dB, –40 dB, or –∞.
šThe factory default setting is –20 dB.
šThe factory default setting is –20 dB.
1
Press and hold ATT on the unit for 2 seconds
or longer.
or longer.
The attenuation level will appear on the display.
2
Press ATT on the unit.
The attenuation level setting value changes each time
the button is pressed.
the button is pressed.
If not operated for 2 seconds, the current setting is saved and
the display returns to normal.
the display returns to normal.