Marantz PM-14S1 Owner's Manual

23

ENGLISH

When multiple amplifiers are connected by F.C.B.S., the error messages described in the 
table below may be displayed on the display. In such a case, ID number setting or remote 
cable connection may be in failure. Check the ID number or remote cable connection, referring 
to the table below. For details on ID number setting, see “Setting ID number for F.C.B.S” 
(

vpage 18).

1

ERROR 02

Multiple amplifiers take ID No. 2.

2

ERROR 03

Multiple amplifiers take ID No. 3.

3

ERROR 04

Multiple amplifiers take ID No. 4.

! Assign different ID numbers to the amplifiers.
4

ERROR 11

The amplifiers with ID Nos. 2-4 cannot communicate with the 
amplifier with ID No. 1.

! If the amplifier with ID No. 1 is not on, turn it ON.
! Check that the remote cable is properly connected.
5

ERROR 12

The amplifier with ID No. 1 cannot communicate with the amplifiers 
with ID Nos. 2-4.

! If multiple amplifiers take ID No. 1, set ID numbers properly.

! If the amplifier with ID No. 1 is connected to the amplifier with ID No. 0, set ID numbers 

properly.

! Check that the remote cable is properly connected.