AudioSource AD1002 Owner's Manual

OWNER’S MANUAL

AD1002

AudioSource®
13970 SW 72nd Ave
Portland, OR 97223
503.914.4688
www.audiosource.net

AD1002 Owner’s Manual 51115

Congratulations on your purchase of the AudioSource® AD1002.
Please take a few moments to read this entire manual, and be sure to
retain this document for future reference. Please read and observe all
safety instructions detailed on page 2.

NOTE: If any part of this product is damaged or missing, please call your
dealer or AudioSource® directly at 1.877.715.5439 or 503.914.4688.

Please read your warranty and retain your receipt and original carton
for possible future use.

For more information about AudioSource® electronics, speakers and
accessories please visit www.audiosource.net

AD1002

Digital Stereo Power Amplifier

FEATURES:

MAIN / INTERRUPT priority input switching

MAIN auxiliary output

Speaker A/B switching

Front panel Balance and Volume controls

Signal sensing “Power On” and Trigger mode

SPECIFICATIONS

Stereo (8 ohm):

50W per channel, <1% THD+N

Stereo (4 ohm):

75W per channel, <1% THD+N

Bridged Mono (8 ohm):

160W, 1kHz, <1% THD+N

Frequency Response:

10Hz ~ 30kHz, -2dB/ +1dB

Signal to Noise Ratio:

100dB below 50W output into 8 ohms
w/20kHz Lowpass filter

Channel Separation:

65dB @ 1kHz, referred to 50W output
into 8 ohms

Input Sensitivity:

700mV input for rated 50W output
into 8 ohms

AC Power Consumption:

200W maximum

Net Weight:

4.7lbs / 2.2kgs

Gross Weight:

6.8lbs / 3kgs

2.15”

(55mm)

16.9” (430mm)

7.65”

(194mm)

Left

Right

Balance

Volume

SPEAKERS

AD1002

Min

-AX

POWER

Rear mounted treble and bass controls

Bass/Treble Control:

+/- 12dB @ 100Hz and 10kHz

DIGITAL

STEREO POWER AMPLIFIER