AudioSource AMP102VS Owner's Manual
OWNER’S MANUAL
AMP102VS
AudioSource®
13970 SW 72nd Ave
Portland, OR 97223
503.914.4688
www.audiosource.net
13970 SW 72nd Ave
Portland, OR 97223
503.914.4688
www.audiosource.net
AMP102VS Owner’s Manual 72015
Congratulations on your purchase of the AudioSource® AMP102VS.
Please take a few moments to read this entire manual, and be sure to
retain this document for future reference. Please read and observe all
safety instructions detailed on page 2.
retain this document for future reference. Please read and observe all
safety instructions detailed on page 2.
NOTE: If any part of this product is damaged or missing, please call your
dealer or AudioSource® directly at 1.877.715.5439 or 503.914.4688.
dealer or AudioSource® directly at 1.877.715.5439 or 503.914.4688.
Please read your warranty and retain your receipt and original carton
for possible future use.
for possible future use.
For more information about AudioSource® electronics, speakers and
accessories please visit www.audiosource.net
accessories please visit www.audiosource.net
AMP102VS
Stereo Power Amplifier
FEATURES:
MAIN / INTERRUPT priority input switching
MAIN auxiliary output
Speaker A/B switching
Front panel Balance and Volume controls
Signal sensing “Power On” and Trigger mode
SPECIFICATIONS
Stereo (8 ohm):
55W per channel, <0.2% THD+N
Stereo (4 ohm):
75W per channel, <0.2% THD+N
Bridged Mono (8 ohm):
160W, 1kHz, <0.2% THD+N
Frequency Response:
10Hz ~ 50kHz, +0dB/ -3dB
Signal to Noise Ratio:
100dB below 50W output into 8 ohms
Channel Separation:
70dB
Input Sensitivity:
700mV input for rated 50W output
into 8 ohms
into 8 ohms
AC Power Consumption:
500W maximum
Net Weight:
14lbs / 6.4kgs
Gross Weight:
17.4lbs / 7.9kgs
Rear mounted treble and bass controls
Bass/Treble Control:
+/- 12dB @ 100Hz and 10kHz
3.8”
(96.5mm)
16.5” (419mm)
8.25”
(210mm)