Russound CAA66 Owner's Manual
20
Source Audio Connections
The CAA66 supports up to six audio sources. The
Source Inputs are located on the back panel.
Connect each source using quality RCA signal
cables. Connect the Left and Right Audio outputs
from each source to the corresponding inputs on
the CAA66 controller. Label each cable with the
name of the selected source and the Source
Audio input number located on the CAA66.
The CAA66 supports up to six audio sources. The
Source Inputs are located on the back panel.
Connect each source using quality RCA signal
cables. Connect the Left and Right Audio outputs
from each source to the corresponding inputs on
the CAA66 controller. Label each cable with the
name of the selected source and the Source
Audio input number located on the CAA66.
Source IR Connections
Each source component has a designated IR
port on the back of the CAA66. This IR port is
directly above the Source Audio Input
Connections.
Each source component has a designated IR
port on the back of the CAA66. This IR port is
directly above the Source Audio Input
Connections.
1. Using an IR emitter (the Russound 845.1 is
recommended) attach the end of the emitter
with the 1/8
recommended) attach the end of the emitter
with the 1/8
”
plug to the IR emitter port above
the source input.
2. Remove the adhesive back at the other end
of the emitter and attach the emitter over the
source component’s IR window.
of the emitter and attach the emitter over the
source component’s IR window.
3. In order to control this source component
with IR, the source must be selected at the
keypad receiving the command.
with IR, the source must be selected at the
keypad receiving the command.
INSTALLER
MAKING CONNECTIONS
Source Audio and IR Connections