Russound CAA66 Owner's Manual

6

The CAA66 front panel consists of a split molded
piece with a removable bottom half. This bottom piece
hides the Programming Center buttons. The power
switch has a push on/push off action with a blue LED

“power on” indicator to the left which illuminates when
the unit is on. The six zone LEDs light up amber when
the zones are active.  

POWER ON/OFF LED - Indicates power on when illuminated

MAIN POWER SWITCH - Turns power on and off

ROOM LED INDICATORS - Indicate when a room is on (amber) or off (not lit)

REMOVABLE COVER - Covers the Programming Center buttons on the controller

The CAA66 front panel bottom half hides the
Programming Center.  
The Programming Center is used to perform the con-
troller setup and source setup procedures. These are
explained in detail in the Installers section of this man-
ual. The Programming Center button LEDs light at dif-
ferent rates and in different colors during these proce-

dures to indicate programming steps. It also contains
an IR receiver window for remote control use during 
programming.  
Note: It is important to properly remove the panel to
prevent damage. See page 15 for complete instruc-
tions.

PROGRAMMING CENTER - used to perform the controller setup and
source setup procedures