Russound CAA66 Controller Kit Owner's Manual

25

12VDC Mute Trigger In
When 12VDC is applied to the Mute In, the sys-
tem will fully mute all zones in the system. The
connections for the trigger are made using a two-
conductor cable with 1/8” male mini-plug jacks.
The tip is positive (+) and sleeve is negative (-).
This allows for the connection of an external pag-
ing or muting device. Note: The CAA66 will not
accept a paging audio input; however, if used
with an independent paging system with 12V trig-
ger out, that can be used to trigger the mute. 

12VDC System Trigger Out
Trigger Out 12VDC output is used for triggering
an external amplifier or other component. The
connections for the output are made using a
two-conductor cable with 1/8” male mini-plug
jacks at each end. The tip is positive (+) and
sleeve is negative (-). The System Trigger Out
supplies 12VDC when the first keypad is turned
on. The 12 VDC is removed 5 minutes after the
last keypad is turned off.