Sennheiser Flex 5000 Owner's Manual

Using additional functions

Flex 5000  

|  31

Restoring the factory default settings

To restore the transmitter to the factory settings:

1

Disconnect the transmitter from the power supply system by 
unplugging the connector of the power supply unit.

2

Simultaneously press and hold the buttons 

L

,  

and 

R

.

3

Connect the transmitter to the power supply system by connect-
ing the connector of the power supply unit to the yellow socket 
of the transmitter while keeping the 3 buttons pressed for at 
least 3 seconds.
All LEDs on the transmitter flash. The transmitter settings are 
restored to the factory settings.

To restore a receiver to the factory settings:

왘

Place the receiver into the transmitter’s charging compartment. 
The 

Receiver status

 LED flashes green. The settings of the 

receiver are also restored to the factory settings.

 

왘

Disconnect the transmitter from the power supply system by 
unplugging the connector of the power supply unit.
The factory settings are restored and you can use the wireless 
headphone system again.

1

2

3

1A

1A

1A

If you place the receiver into the transmitter’s charging com-
partment at the very beginning of the restore procedure, the 
factory settings of the transmitter and the receiver are 
restored simultaneously.