Sony HT-CT290 Owner's Manual

20

US

• If the connected equipment is not 

compatible with copyright-protection 
technology (HDCP), the image and/or 
the sound from the HDMI OUT jack of 
this system may be distorted or may 
not be output. In such a case, check 
the specifications of the connected 
equipment.

Auto standby function

The system enters standby mode 
automatically when you do not operate 
the system for about 20 minutes and 
the system is not receiving an input 
signal.

When the system enters standby mode, 
all LED indicators except BLUETOOTH 
indicator (blue) flash slowly.

Activating wireless 
transmission between 
specific units (Secure 
Link)

You can specify the wireless connection 
to link the Bar Speaker to the subwoofer 
using the Secure Link function. This 
function can help prevent interference if 
you use multiple wireless products.

1

Press LINK on the rear of the 
subwoofer.
The power indicator on the 
subwoofer flashes in orange.

2

Hold down CLEAR AUDIO+ for 
5 seconds.
The USB and TV indicators flash two 
times, then the MOVIE and MUSIC 
indicators flash alternately.
When the Bar Speaker is linked to 
the subwoofer, the indicators stop 
flashing and the power indicator on 
the subwoofer lights up in orange.
If it failed, the indicators light up for 
5 seconds. Try again the above 
operation.

The USB indicator flashes twice.

On
The USB and TV indicators flash twice.

Off
The USB indicator flashes twice.