Zvox SoundBar SB500 Owner's Manual
4b. End Panel Controls on the Soundbar
On the viewer’s right end of the soundbar are four buttons.
A) POWER button:
This button turns the soundbar “ON” if it is in Standby. If this button is pressed briefly while the
soundbar is “ON”, it will mute and unmute the soundbar. To turn off the soundbar, press and
hold down this button for about five seconds.
This button turns the soundbar “ON” if it is in Standby. If this button is pressed briefly while the
soundbar is “ON”, it will mute and unmute the soundbar. To turn off the soundbar, press and
hold down this button for about five seconds.
B) Volume Up/Down rocker button
Adjusts volume up and down. Pressing either side of this button will “unmute” the speaker if it is
muted.
Adjusts volume up and down. Pressing either side of this button will “unmute” the speaker if it is
muted.
C) Input button:
A brief press and release of the INPUT button selects the next input in sequence.
A brief press and release of the INPUT button selects the next input in sequence.
5. Tonal Profile Setting
The soundbar has three selectable tonal profiles that allow it to better match the acoustics of its
room position. Use the soundbar's PS menu feature to choose one of these three settings.
room position. Use the soundbar's PS menu feature to choose one of these three settings.
Face Front ........ PS16 - on a flat surface, facing front.
Face Up ............ PS17 - on a flat surface, facing up.
Wall Mount ....... PS18 - on a vertical surface, facing into the room.
The default setting for the soundbar is Face Front.
If your soundbar’s position is Face Up or Wall Mount, you should select PS17 or PS18 from the
PS menu.
PS menu.
PS Menu: You adjust the PS Menu setting by first pressing down on two buttons on the end
panel of the soundbar: Power ( ) and Volume Up (+). After about five to seven seconds you
should see PS start flashing on the soundbar's display. The first time you bring up the PS menu,
it should show “PS 0”.
panel of the soundbar: Power ( ) and Volume Up (+). After about five to seven seconds you
should see PS start flashing on the soundbar's display. The first time you bring up the PS menu,
it should show “PS 0”.
Once you see the PS display, release the buttons. Then press and release the Volume Up button
to increase the PS number. Continue pressing and releasing the Volume Up button until you
reach the setting you want: PS16, PS17 or PS18.
to increase the PS number. Continue pressing and releasing the Volume Up button until you
reach the setting you want: PS16, PS17 or PS18.
If your home TV system does not match the descriptions in this
guide, don’t hesitate to send an inquiry to info@zvoxaudio.com
or call ZVOX Audio at (866) 367-9869. Please provide your TV
brand and model number. A ZVOX Audio representative should be
available (Eastern Time Zone) 9:30 AM to 7:30 PM Monday through
Friday and 10:30 AM to 5:30 PM on Saturday.
A
B
C