Polk Audio Omni SB1 Plus Owner's Manual

1. 

www.polkaudio.com   

 

 

 

 

       

 

 

 

 

 

                   3

Please unpack the components carefully, removing the subwoofer  
first as indicated on the carton and then the sound bar. 

 
We recommend saving all cartons and packing materials in case  
you move, or should you need to ship your SB1 Plus.

1. Sound bar

2. Wireless subwoofer

3.  8' analog stereo cable (3.5mm)

4.  6' optical cable

5.  Subwoofer power cable

6.  Sound Bar power cables (6' power supply; 8' power cable)

7.  Remote control (battery included)
8.  Bluetooth adapter (includes 3.5mm to 3.5mm cable)

OPT IN

TV OPT OUT

You likely have many sources for your audio signal: your TV, your  
DVD player or a cable/satellite box. The bar is able to accept  
audio from up to three different sources. The simplest approach 
is to connect the optical audio output from your TV to the optical 
input on the back of the SB1 Plus bar. This connection will provide 
the highest quality audio regardless of whether you are watching 
TV or DVD. If your TV does not have an optical output, you can 
use the optical output from your DVD player or your cable/satellite 
box to connect directly to the optical input on the SB1 Plus bar.

While you can place your SB1 Plus wireless subwoofer anywhere  
in your room, bass performance can be maximized by placing the  
subwoofer in a corner. Once the subwoofer has found its final  
position, simply connect the subwoofer power cable from your  
power outlet to the SB1 Plus subwoofer. Then flip the power  
switch on the back of the subwoofer. Your Polk SB1 Plus subwoofer 
comes pre-paired out of the box to the SB1 Plus soundbar, so  
it will automatically sync with your soundbar.

Power On/Off

Increase/Decrease 
Bass

Source Select

Play/Pause

Increase/Decrease 
Volume

Wi-Fi Setup 

Increase/Decrease 
Voice Volume 

Power, Source/Learn, Master Volume, Center Channel Volume,  

Subwoofer Volume, Mute, Wi-Fi Pair/Connect. These settings  
can also be adjusted using the included IR remote control; movie  
and music listening modes are selected only from the remote control. 

1.  Power—Turns on the bar or puts it in standby mode.

2.   Source/Learn—Puts the bar into “learning mode” so you  

can program it to respond to commands from your TV’s IR  
remote control. Source/Learn also changes which input source 
you are listening to.

 

Source 1: digital/optical

 

Source 2: analog

 

Source 3: Wi-Fi ( ): Wi-Fi

®

 wireless

3.   Master Volume Up and Down (+ /- )—Adjusts the volume  

of the SB1 Plus Sound Bar Sound bar.

4.   Voice Volume Up and Down (+ /- )—Adjusts the volume  

of the SB1 Plus Sound Bar Sound bar center channel.

5.   Bass Up and Down (+ /- )—Adjusts the volume of the  

SB1 Plus Sound Bar Sound bar subwoofer.

6.   Mute—Mutes and unmutes the sound coming from  

the sound bar.

7.   WiFi – Pairs and connects with a WiFi enabled device   

(See “Wi-Fi Setup” above).

1

2

3

4

5

6

7

8