Sony PS-HX500 Owner's Manual

• Be sure to turn off the audio device, such as a 

stereo system or an amplifier, before connection.

• Be sure to make all the connections before you 

connect the AC adaptor to a power outlet.

Make sure that the PHONO/LINE 
switch on the rear of your turntable 
is set to LINE.

If you want to use the PHONO input jacks on 
your audio device for connection, set the 
PHONO/LINE switch to PHONO. This, however, 
will significantly lower the audio output level.

Connect the supplied PHONO cables 
to the AUX or analog input jacks on 
the audio device.

Plug the white plug of the cable to the 
white (L) jack and the red plug to the red 
(R) jack.

Be sure to insert the plugs firmly into the jacks. 
Loose connection will cause playback noises.

Your audio devices may have the grounding 
terminal near the PHONO input jacks. 
Connecting the grounding terminals on the 
turntable and the audio device with a 
grounding wire may reduce playback noises.