Petsafe Smart Feed Owner's Manual

Customer Care Center +1 (800) 732-2677

8

1.  If any food is in the feeder, use the Feed Now 

button in the app or the manual feed button on 
the feeder to remove any food from the conveyor 
and food hopper. 

2.  Remove the stainless steel bowl and bowl holder. 
3.  Turn off the power switch and unplug the feeder.
4.  Remove the lid by pulling the lid latch then  

lifting up.

5.  Unlock the food hopper latches on each side of 

the feeder and remove the hopper.

6.  Pull back the red conveyor latch inside the 

bottom of the feeder to unlock the conveyor. Lift 
the conveyor to remove.

7.  Remove the conveyor crumb catcher by gently 

pressing in sides and pulling down. 

8.  The stainless steel bowl is dishwasher safe. 

The bowl holder, lid, and hopper are top-shelf 
dishwasher safe. The conveyor and crumb 
catcher must be washed by hand. Submerge 
conveyor and crumb catcher in warm soapy 
water and use a cleaning brush or toothbrush to 
clean food pieces from the conveyor belt. Rinse 
both parts and stand conveyor upright on a flat 
surface to air dry.

1.  Make sure all parts are completely dry before 

reassembling the feeder.

2.  Replace the crumb catcher on the conveyor. 

Align a conveyor belt lip with the arrows on the 
side of the conveyor housing.