Petsafe Smart Feed Owner's Manual
www.petsafe.net
5
System Requirements:
• iPhone or iPod with iOS 9 or later or compatible Android smartphone 5.0 or later
• Wireless router 2.4GHz (802.11b/g/n)
• High-speed internet connection
• Wireless router 2.4GHz (802.11b/g/n)
• High-speed internet connection
Setup and Assemble Feeder
1. Remove the components located inside the
food hopper.
2. If you want, wash and rinse the bowl, bowl
holder, food hopper, lid and conveyor. Once
parts are dry, replace the conveyor and food
hopper ensuring conveyor is aligned and
installed correctly.
parts are dry, replace the conveyor and food
hopper ensuring conveyor is aligned and
installed correctly.
3. Plug in the power adapter. If you want, install (4)
D-Cell alkaline batteries in case of a power
outage. Turn on the power switch on the bottom
of the feeder. The LED will blink white indicating
the feeder is on but not yet connected to Wi-Fi.
outage. Turn on the power switch on the bottom
of the feeder. The LED will blink white indicating
the feeder is on but not yet connected to Wi-Fi.
4. Place the bowl into the bowl holder. Lift feeder
and slide the holder notch into the groove on the
bottom of the feeder.
bottom of the feeder.
1
3
4
2