Sony BDP-S6700 Owner's Manual

Page of 74
31
BDP-S6700/BDP-BX670
4-579-669-11(1)
master page=right
E:\SONY
DVD\SD150016\4579669111_US\060ADJ.fm
Settings
 and Adjustments
z
LDAC is an audio coding technology 
developed by Sony that enables the 
transmission of High-Resolution (Hi-Res) 
Audio content, even over a Bluetooth 
connection. Unlike other Bluetooth 
compatible coding technologies such as SBC, 
it operates without any down conversion of 
the Hi-Res Audio content*, and allows 
approximately three times more data** than 
those other technologies to be transmitted over 
a Bluetooth wireless network with 
unprecedented sound quality, by means of 
efficient coding and optimized packetization.
*
Excluding DSD format contents.
** In comparison with SBC (Subband 
Coding) when the bitrate of 990 kbps 
(96/48 kHz) or 909 kbps (88.2/44.1 kHz) 
is selected.
[Wireless Playback Quality]
This function is enabled when 
[Bluetooth Mode] and [Bluetooth Codec 
- LDAC] is set to [On]. If sound output 
or network streaming is unstable, please 
select [Connection].
[Auto]: Sets the transmission data rate 
for LDAC automatically.
[Sound Quality]: The highest data rate is 
used. Sound is sent at a higher quality, 
but audio playback may become 
unstable if the link quality is not 
sufficient.
[Standard]: A medium data rate is used. 
This provides a balance between sound 
quality and playback stability.
[Connection]: Stability is prioritized. 
The sound quality may be reasonable 
and the connection status will most 
likely be stable.
[BD/DVD Viewing 
Settings]
[BD/DVD Menu Language]
Selects the default menu language for 
BD-ROMs or DVD VIDEOs.
Select [Select Language Code], and 
enter the code for your language, 
referring to “Language code list” 
(page 45).
[Audio Language]
Selects the default audio language for 
BD-ROMs or DVD VIDEOs.
When you select [Original], the 
language given priority in the disc is 
selected.
Select [Select Language Code], and 
enter the code for your language, 
referring to “Language code list” 
(page 45).
[Subtitle Language]
Selects the default subtitle language for 
BD-ROMs or DVD VIDEOs.
Select [Select Language Code], and 
enter the code for your language, 
referring to “Language code list” 
(page 45).
[BD Hybrid Disc Playback Layer]
[BD]: Plays BD layer.
[DVD/CD]: Plays DVD or CD layer.
[BD Internet Connection]
[Allow]: Normally select this.
[Do not allow]: Prohibits Internet 
connection.