Sony UBP-X800 Owner's Manual
3
UBP-X800 / UBP-UX80
4-687-309-11(1)
master page=right
D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\010COVTOC.f
m
This label is located on the laser protective
housing inside the enclosure.
housing inside the enclosure.
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
PRECAUTIONS
• To reduce the risk of fire or electric shock,
do not expose this appliance to dripping or
splashing, and do not place objects filled
with liquids, such as vases, on the
appliance.
splashing, and do not place objects filled
with liquids, such as vases, on the
appliance.
• Install this unit so that the AC power cord
can be unplugged from the wall socket
immediately in the event of trouble.
immediately in the event of trouble.
• This equipment has been tested and found
to comply with the limits set out in the EMC
Directive using a connection cable shorter
than 3 metres.
Directive using a connection cable shorter
than 3 metres.
• Place the player in a location with adequate
ventilation to prevent heat build-up in the
player.
player.
• To reduce the risk of fire, do not cover the
ventilation opening of the appliance with
newspapers, tablecloths, curtains, etc.
newspapers, tablecloths, curtains, etc.
• Do not expose the appliance to naked flame
sources (for example, lighted candles).
• Do not install this player in a confined
space, such as a bookshelf or similar unit.
• Do not place the player outdoors, in
vehicles, on ships, or on other vessels.
• If the player is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense on the
lenses inside the player. Should this occur,
the player may not operate properly. In this
case, remove the disc and leave the player
turned on for about half an hour until the
moisture evaporates.
damp room, moisture may condense on the
lenses inside the player. Should this occur,
the player may not operate properly. In this
case, remove the disc and leave the player
turned on for about half an hour until the
moisture evaporates.
• Do not install the player in an inclined
position. It is designed to be operated in a
horizontal position only.
horizontal position only.
• Do not place metal objects in front of the
front panel. It may limit reception of radio
waves.
waves.
• Do not place the player in a place where
medical equipment is in use. It may cause a
malfunction of medical instruments.
malfunction of medical instruments.
• If you use a pacemaker or other medical
device, consult your physician or the
manufacturer of your medical device before
using the wireless LAN function.
manufacturer of your medical device before
using the wireless LAN function.
• Do not place heavy or unstable objects on
the player.
• Do not place any objects other than discs on
the disc tray. Doing so may cause damage
to the player or the object.
to the player or the object.
• Take out any discs from the tray when you
move the player. If you don’t, the disc may
be damaged.
be damaged.
• Disconnect the AC power cord and all other
cables from the player when you move the
player.
player.
• The player is not disconnected from the AC
power source as long as it is connected to
the wall outlet, even if the player itself has
been turned off.
the wall outlet, even if the player itself has
been turned off.
• Disconnect the player from the wall outlet if
you are not going to use the player for a
long time. To disconnect the AC power
cord, grasp the plug itself; never pull the
cord.
long time. To disconnect the AC power
cord, grasp the plug itself; never pull the
cord.
• Observe following points to prevent the AC
power cord being damaged. Do not use the
AC power cord if it is damaged, as doing so
may result in an electric shock or fire.
– Do not pinch the AC power cord between
AC power cord if it is damaged, as doing so
may result in an electric shock or fire.
– Do not pinch the AC power cord between
the player and wall, shelf, etc.
– Do not put anything heavy on the AC
power cord or pull on the AC power cord
itself.
itself.
• Do not turn up the volume while listening to
a section with very low level inputs or no
audio signals. Your ears and the speakers
may be damaged when the sound level
reaches the peak.
audio signals. Your ears and the speakers
may be damaged when the sound level
reaches the peak.
• Clean the cabinet, panel, and controls with
a soft cloth. Do not use any type of abrasive
pad, scouring powder or solvent such as
alcohol or benzine.
pad, scouring powder or solvent such as
alcohol or benzine.
• Do not use cleaning discs or disc/lens
cleaners (including wet or spray types).
These may cause the apparatus to
malfunction.
These may cause the apparatus to
malfunction.
• In the events that this player is repaired,
repaired parts may be collected for reuse or
recycling purposes.
recycling purposes.