Exakta DC-2100 User Guide

First check the warning displayed on the LCD monitor and the viewfinder lamp. Then check the following items.

Remedy

Replace with new batteries.

Plug the adapter back in.

Turn on the power switch.

Replace with new batteries.

Put the battery in your pocket or another warm
place to heat it and then load it into the camera
just before you take a picture.

Wipe the battery terminals with a clean, dry cloth.

Replace with new batteries.

Load a SmartMedia™ card.

Load the SmartMedia™ card correctly.

• Load a new SmartMedia™ card.
• Erase photographed images or change the size

and quality to increase space on the
SmartMedia™ card.

Remove the write-protection or replace with a new
SmartMedia™ card.

Format the SmartMedia™ card.

Load a new SmartMedia™ card.

Either press the shutter button fully down, or
change the mode dial setting.

Causes

The batteries are exhausted.

The AC adapter plug has come out of
the power outlet.

The power switch is not turned on.

The batteries are exhausted.

You are using the camera in extremely
cold conditions.

The terminals are dirty.

The battery has reached the end of its
effective life.

No SmartMedia™ card is loaded.

The SmartMedia™ card

 

is loaded

incorrectly.

Not enough space on the
SmartMedia™ card

The SmartMedia™ card

 

is write-

protected.

The SmartMedia™ card is not formatted.

The SmartMedia™ card is damaged.

The Auto Power OFF function is
activated.

Problem

No power supply

The camera turns OFF
during operation.

The battery runs out
quickly.

No photograph is taken
when the shutter button
is pressed.