Fujifilm FinePix 2400 Zoom User Guide
75
74
Switch the Frame NO. Memory function off and
use a formatted SmartMedia to take the picture.
use a formatted SmartMedia to take the picture.
Warning Displayed
The frame number has reached 999-
9999.
9999.
There is a strong likelihood of camera
shake because the shutter speed is slow.
shake because the shutter speed is slow.
A protected frame was erased.
The AF (auto focus) cannot work
effectively.
effectively.
The DPOF file contains an error.
Alternatively, the DPOF file was set up
on a different device.
Alternatively, the DPOF file was set up
on a different device.
Use a tripod or set the flash mode to Auto, Red-
eye Reduction or Forced Flash.
eye Reduction or Forced Flash.
Remove the protection.
•
If the shot is too dark, move at least 1.5 m away
from the subject and try again.
from the subject and try again.
•
Use AF/AE lock to take the picture.
Press the MENU/OK button to create a new
DPOF file and specify all the DPOF settings
again.
DPOF file and specify all the DPOF settings
again.
Explanation
Remedy
Prints were specified for more than 1000
frames in the DPOF frame settings.
frames in the DPOF frame settings.
The lens cover is not open.
Lens malfunction or fault.
The maximum number of frames for which prints
can be specified on the same SmartMedia is 999.
can be specified on the same SmartMedia is 999.
Open the lens cover.
Try switching the camera on and off a few times.
AF
!
Outside the AE continuous range.
• The shot can be taken, but the exposure will
not be correct.
AE
!
Explanation
Warning Displayed
Remedy
The camera battery is low on charge.
No SmartMedia is loaded, or it is loaded
incorrectly.
incorrectly.
The SmartMedia is not formatted.
• The SmartMedia contact area are soild.
• The SmartMedia is damaged.
• The SmartMedia format is incorrect.
• The SmartMedia is damaged.
• The SmartMedia format is incorrect.
The SmartMedia is fully recorded.
The SmartMedia is write-protected.
• An attempt was made to playback
incorrectly recorded data.
• An attempt was made to playback a
frame not recorded on camera.
Replace or recharge the battery.
Insert the SmartMedia (3.3V) in the correct
direction.
direction.
Format the SmartMedia.
Wipe the contact area on the SmartMedia with a
soft dry cloth. It may be necessary to format the
SmartMedia. If the error message is still
displayed, replace the SmartMedia.
soft dry cloth. It may be necessary to format the
SmartMedia. If the error message is still
displayed, replace the SmartMedia.
Use a SmartMedia that is not write-protected.
Images cannot be played back.
Erase some images or use a SmartMedia that
has ample free space.
has ample free space.
Warning Displays
eThe table below lists the warnings that are displayed on the LCD monitor.
You attempted to erase a frame with
DPOF settings.
DPOF settings.
Reset the DPOF settings.